Installation, Operation & Maintenance InstructionsPlease leave this instruction booklet with the owner as it contains important guarantee, mainten
- 10 -Cont ...3.12 Hose to pipework: 1. The hoses are fitted with plastic push-in connectors, which must only be connected with the foll
- 11 -Cont ...3.13 Pumps supplied with flexible inlet and outlet hoses: Flexible pipes are supplied with this pump variant. The pump inlet and outl
- 12 -Cont ...Fig. 1222 mm Inlet pipework fed from water storage system.22 mm Copper outlet pipeworkOutletOutletInletIn the case of horizontal feeds
- 13 -4 ELECTRICAL INSTALLATION / EARTHING4.11 Regulations: The electrical installation must be carried out in accordance with the current na
- 14 -Cont ...4.21 Fuse: The following fuse size should be used with the appropriate pump:Model Fuse Size (AMPS)All Models 54.22 Internal WiringDo
- 15 -Cont ...5 COMMISSIONING5.11 System Flushing: This pump incorporates push-in connectors and plastic components that must not come into con
- 16 -Cont ...6 MAINTENANCE Do not remove the terminal box cover. No user serviceable parts inside.6.11 There are no user serviceable parts a
- 17 -Cont ...7 TECHNICAL SPECIFICATIONStuart Turner reserve the right to amend the specification in line with its policy of continuous development of
- 18 -8 TROUBLE SHOOTING GUIDE8.11 Environment Protection: Your appliance contains valuable materials which can be recovered or recycled. At th
- 19 -9 THE SHOWERMATE GUARANTEECongratulations on purchasing a Stuart Turner pump. We are confident this pump will provide many years of trouble fre
- 2 -PRODUCT DESCRIPTIONElectric motor driven single or twin ended peripheral pump complete with an automatic control system, consisting of flow switc
DECLARATION OF CONFORMITY2006/42/ECBS EN ISO 12100-1, BS EN ISO 12100-2, BS EN 8092006/95/ECBS EN 60335-1, BS EN 60335-2-412004/108/ECBS EN 55014-1, B
- 3 -CHECKLISTYour product may vary slightly from the picture above.The quantities shown above are for twin pumps, (single pumps are shown in brackets
- 4 -Cont ...1 READ BEFORE COMMENCING PUMP INSTALLATIONA. Water storage capacity.1.11 The hot and cold water storage capacity must be sufficient to
- 5 -2 LOCATION - GENERAL2.11 Access: For emergencies and maintenance the pump must be easily accessible.2.12 Protection: The pump must be locat
- 6 -Cont ...2.26 Non-Preferred Pump Location: The pump must be located with at least 0.5 metre flooded suction at all times. If it is not pos
- 7 -Cont ...2 LOCATION - TWIN PUMP2.27 The cold water supply: Must be a DEDICATED AIR FREE supply via a tank connector, and must be positione
- 8 -Cont ...Hot water connection:2.29 Hot water cylinder or storage tank: When a hot water cylinder or storage tank is used, ensure the pipewor
- 9 -Cont ...3 PUMP CONNECTIONS Do not use stainless steel, chrome or nickel plated pipe with the flexible hose push-in plumbing connections.
Comments to this Manuals