Stuart-turner Submersible Supersub User Manual

Submersible PumpsOPERATING INSTRUCTIONSPlease leave this instruction booklet with the pump as it contains maintenance and safety information(Original

- 10 -Supply Cord ReplacementThe power supply cord of this pump cannot be replaced. If the cord is damaged, the pump should be scrapped.Float Switch

- 11 -For Further Technical SupportNote: When pumps are installed in another manufacturers original equipment, please contact the manufacturer for adv

- 12 -Supervort Range1) Disconnect electrical supply before working on pump.2) Release system pressure from pipework and remove pump from water (do

- 13 -TROUBLE SHOOTING GUIDESymptoms Probable Cause Recommended ActionPump stops running. Thermal overload protection has tripped.Disconnect the power

- 14 -YOUR 1 YEAR GUARANTEEStuart Pumps are guaranteed by Stuart Turner Limited to be free from defects in materials or workmanship for the applicabl

- 15 -NOTES

Stuart Turner Ltd, Henley-on-Thames, Oxfordshire RG9 2AD ENGLAND Tel: +44 (0) 1491 572655, Fax: +44 (0) 1491 573704email: pumps@stuart-turn

- 2 -SUBMERSIBLE MODELSINDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page NoApplication . . .

- 3 -GeneralThe submersible pump range is designed for re-circulation, drainage and transfer of fresh water in outdoor or indoor applications.Model ty

- 4 -TECHNICAL SPECIFICATIONStuart Turner reserve the right to amend the specification in line with its policy of continuous development of its produc

- 5 -CONNECTIONSSupersub and Supervort pumps are supplied with a 90o elbow and stepped hose connector which can be screwed into the pump outlet port.P

- 6 -SITING OF THE PUMPWARNINGS:  Do not run against a closed valve for periods longer than 5 minutes.  The water in and around the pump must not be

- 7 -If modification of the level setting is required refer to Figures 7 and 8 and the following chart.If the pump is required to drain, for instance,

- 8 -PIPEWORKWARNINGEnsure pipework from pump is independently supported to prevent forces being transferred to outlet branch.GeneralAll models are s

- 9 -Wiring (Supersub & Supervort range)The moulded plug fitted to this appliance is not waterproof - keep dry.The supply cord is factory fitted w