Stuart-turner Self Priming Jet 40 Centrifugal User Manual

Please leave this instruction booklet with the pump as itcontains maintenance and safety information(Original Instructions)SELF PRIMING JET PUMPSOPERA

- 10 -Supply Cord ReplacementIf the supply cord is to be changed or is damaged, it must be replaced with a specialcord assembly available from Stuart

- 11 -2. Water SupplyAlways ensure that water storage capacity is adequate to meet the demand. Ensure the pump chamber is full of water before starti

- 12 -b) Suction lift installationIt is important that the optional suction hose assembly is always used for this application.A footvalve and straine

- 13 -3. Turn off water supplies to the pump and release pressure by opening outlets before attempting maintenance.4. If the installation is fitted wi

- 14 -ENVIRONMENT PROTECTIONYour appliance contains valuable materials which can be recovered or recycled.At the end of the products’ useful life, ple

- 15 -NOTES

Issue No. 1010/7-13 Pt. No. 17750DECLARATION OF CONFORMITY2006/42/ECBS EN ISO 12100-1, BS EN ISO 12100-2, BS EN 8092006/95/ECBS EN 60335-1, BS EN 6033

- 2 -MODELS: Jet 40Jet 90INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- 3 -PRODUCT DESCRIPTIONMotorInduction type, totally enclosed fan ventilated cooling, continuously rated, class ‘B’insulation, permanent capacitor, IP

- 4 -Jet 40The inlet and outlet ports of this pump range are supplied with factory fitted port sealingwashers (Fig. 1).This provides the option of sea

- 5 -The G1 union connectors (see above) utilisean ‘O’-ring seal between the union and thepump. These unions should only be tightened‘hand tight’ for

- 6 -GeneralLocate the pump in a frost free horizontal position where it cannot be sprayed withwater and as close to the water source as possible.The

- 7 -Pump Mounted Above Water Source (Suction Lift Installation)The pumps can be used in a suction lift installation providing the height of lift is w

- 8 -The standard pumps are suitable for a supply of 230V, 1 Phase, 50Hz. Other voltagesand frequencies are available on certain models and it is the

If the plug supplied is not suitable for your socket outlet, it should be cut off anddestroyed.WARNING: A plug with bared flexible cords is hazardous