LS5 Installation & Maintenance InstructionsPlease leave this instruction booklet with the home owner as it contains important guarantee, maintenan
- 10 -Cont ...5 COMMISSIONING5.11 The Lifting Station will operate automatically as soon as the required level of water enters the case.5.12 Ch
- 11 -Cont ...6 MAINTENANCE6.11 The Lifting Station should only be used for the removal of grey water. 6.12 AVOID KITCHEN TOWELS, HAIR, FOOD WAST
- 12 -7 TECHNICAL SPECIFICATION Model LS5ElectricalVolts/Ph/Frequency 230/1/50Power consumed 460 WattsFull load current 2.0 AmpsRating ContinuousMax.
- 13 -1804135548,5180OUTLET ADAPTORMATERIAL: FLEXIBLE RUBBERSUITABLE FOR PIPE SIZEO 32mm O.D.(1 1/4")INLET CONNECTIONINLET CONNECTION32,569 CRS90
- 14 -Cont ...8 TROUBLE SHOOTING GUIDE8.11 WARNING: The Lifting Station must be disconnected from the power supply before any service.8.12 A
- 15 -9 THE WASTEFLO GUARANTEECongratulations on purchasing a Stuart Turner Lifting Station. We are confident this Lifting Station will provide many
Stuart Turner Ltd, Henley-on-Thames, Oxfordshire RG9 2AD ENGLAND Tel: +44 (0) 1491 572655, Fax: +44 (0) 1491 573704email: pumps@stuart-turn
- 2 -Cont ...IMPORTANTIn the unlikely event of experiencing a problem with this product, please contact our helpline on 0844 98 000 97Due to the na
- 3 -Cont ...PRODUCT DESCRIPTIONThe LS5 is a compact automatic Lifting Station for domestic use, designed for the drainage of washbasins, showers, bat
- 4 -Cont ...ACCESSORIES CHECKLIST1 LOCATION1.11 The unit can be connected under a washbasin or in a closet. Allow a minimum height of 220 mm a
- 5 -Cont ...3 INSTALLATION INSTALLATION GUIDELINES3.11 Always use smooth bends or 2 x 45o bends. Do not use 90o elbows.3.12 You must insta
- 6 -Cont ... STEP 1 OUTLET CONNECTION3.18 The horizontal outlet pipe must have a minimum fall of 1:100 (1o).3.19 With 32 mm pipework fitted - the
- 7 -Cont ...3.20 The unit is supplied with a non-return valve assembly (A), a universal cover and flexible rubber adaptor with adjustable clips
- 8 -Cont ... STEP 2 SIDE & TOP SANITARY CONNECTIONS3.26 The unit is factory fitted with a cap, to seal all inlet sanitary connections.3.27 S
- 9 -4 ELECTRICAL INSTALLATION4.11 Regulations: The electrical installation must be carried out in accordance with the current national electri
Comments to this Manuals