Stuart-turner S1.3 bar Twin User Manual

Installation, Operation & Maintenance InstructionsPlease leave this instruction booklet with the owner as it contains important guarantee, mainten

- 10 -Cont ...3. Check in the mouth of the fitting that ‘O’-ring, washer and collet are in position.4. Push pipe firmly into fitting, until penc

- 11 -4 ELECTRICAL INSTALLATION / EARTHING4.11 Regulations: The electrical installation must be carried out in accordance with the current na

- 12 -Cont ...4.21 Fuses: The following fuse size should be used with the appropriate pump:Model Fuse Size (AMPS)All models 5

- 13 -Cont ...5 COMMISSIONING5.11 System Flushing This pump incorporates push-in connectors and plastic components that must not come into co

- 14 -Cont ...6.13 No other routine maintenance is required.6.14 Water scale: As water is heated scale deposits are released in areas of hard w

- 15 -Cont ...6.15 Cleaners, Disinfectants and Descalents:Acid based descalents and aggressive cleaning agents must not come into contact with the pu

- 16 -Cont ...Stuart Turner reserve the right to amend the specification in line with its policy of continuous development of its products. Note:

- 17 -Cont ...8 TROUBLE SHOOTING GUIDE8.11 Environment Protection: Your appliance contains valuable materials which can be recovered or recycled

- 18 -Cont ...9 THE TECHFLO qt GUARANTEECongratulations on purchasing a Stuart Turner pump. We are confident this pump will provide many years of tro

- 19 -Cont ...Proof of purchase should accompany the returned unit to avoid delay in investigation and dealing with your claim. You should obtain appr

- 2 -Cont ...PRODUCT DESCRIPTIONElectric motor driven single or twin ended centrifugal pump, complete with an automatic control system, consisting of

DECLARATION OF CONFORMITY2006/42/ECBS EN ISO 12100-1, BS EN ISO 12100-2, BS EN 8092006/95/ECBS EN 60335-1, BS EN 60335-2-412004/108/ECBS EN 55014-1, B

- 3 -Cont ...STORAGEIf this product is not to be installed immediately on receipt, ensure that it is stored in a dry, frost and vibration free locatio

- 4 -Cont ...CHECKLISTItemDescription QtyItemDescription QtyPump 1 Outlet hose only 2 (1)Inlet hose with isolating valve 2 (1)ABCYour product may vary

- 5 -Cont ...1 READ BEFORE COMMENCING PUMP INSTALLATIONA. Water storage capacity.1.11 The hot and cold water storage capacity must be sufficient to

- 6 -Cont ...2 LOCATION - GENERAL2.11 Access: For emergencies and maintenance the pump must be easily accessible.2.12 Protection: The pump must

- 7 -Cont ...2 LOCATION - SINGLE PUMP2.24 The cold water supply: Must be a DEDICATED AIR FREE supply via a tank connector, and must be positio

- 8 -Cont ...2 LOCATION - TWIN PUMP2.25 Hot water cylinder or storage tank: When a hot water cylinder or storage tank is used, ensure the pipew

- 9 -Cont ...3 PUMP CONNECTIONS  Do not use stainless steel, chrome or nickel plated pipe with the flexible hose push-in plumbing connections. 