Stuart-turner CH 4-30 FL User Manual

Installation, Operation & Maintenance InstructionsPlease leave this instruction booklet with the owner as it contains important guarantee, mainten

- 10 -3 ELECTRICAL INSTALLATION / EARTHING3.11 Regulations: The electrical installation must be carried out in accordance with the current na

- 11 -3.23 Supply Cord Replacement:The supply cord and internal wiring within the terminal box are routed and secured to ensure compliance with the e

- 12 -Cont ...4.14 Starting: a) Switch on power and open terminal fitting. b) Open and close all outlets in turn associated with the pump, (inclu

- 13 -Cont ...5 MAINTENANCE5.11 Cleaners, Disinfectants and Descalents:Acid based descalents and aggressive cleaning agents must not come into contac

- 14 -Cont ...6 TECHNICAL SPECIFICATIONStuart Turner reserve the right to amend the specification in line with its policy of continuous development of

- 15 -Cont ...7 TROUBLE SHOOTING GUIDESymptoms Probable Cause Recommended ActionPump will not start. Electrical supply. Check power supply.Check fuse

- 16 -Cont ...7.12 Environment Protection: Your appliance contains valuable materials which can be recovered or recycled. At the end of the prod

- 17 -8 YOUR 1 YEAR GUARANTEEStuart Pumps are guaranteed by Stuart Turner Limited to be free from defects in materials or workmanship and the guarant

- 18 -NOTES

- 19 -NOTES

- 2 -Cont ...PRODUCT DESCRIPTIONElectric motor driven centrifugal pump complete with an automatic control system, consisting of flow switch, and elect

DECLARATION OF CONFORMITY2006/42/ECBS EN ISO 12100-1, BS EN ISO 12100-2, BS EN 8092006/95/ECBS EN 60335-1, BS EN 60335-2-412004/108/ECBS EN 55014-1, B

- 3 -Cont ...CONTENTS PageChecklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- 4 -Cont ...CHECKLISTYour product may vary slightly from the picture above.ItemDescription QtyItemDescription QtyPump 1AAFig. 1IMPORTANT: With the p

- 5 -Cont ...1 READ BEFORE COMMENCING PUMP INSTALLATIONA. Water storage capacity.1.11 The water storage capacity must be sufficient to meet the flo

- 6 -Cont ...2 LOCATION - GENERAL2.11 Access: For emergencies and maintenance the pump must be easily accessible.2.12 Protection: The pump must

- 7 -Cont ...2 LOCATION - COLD WATER INSTALLATION2.25 The cold water supply: The supply must be AIR FREE and have a DEDICATED CONNECTION to

- 8 -Cont ...Hot water connection:2.26 Hot water cylinder or storage tank: When a hot water cylinder or storage tank is used, ensure the pipewor

- 9 -Cont ...2.29 Non-Preferred Pump Location: The pump must be located with at least 1 metre flooded suction at all times. If it is not possibl