Stuart-turner CHM160-30 FL User Manual download pdf (Page 10)

- 10 -

3.23 Supply Cord Replacement:

The supply cord and internal wiring within the terminal box are

routed and secured to ensure compliance with the electrical

standard EN 60335-1. It is essential that prior to any disturbance

of this internal wiring, all cable routing and securing details are

carefully noted to ensure re-assembly to the same factory pattern

is always maintained.

If the supply cord is to be changed or is damaged, it must be replaced with a

special cord assembly available from Stuart Turner or one of their approved

repairers.

On disassembly note the cord retention and routing system. Re-assemble to the

same pattern.

For information on cable connection consult the wiring diagram and cable gland

fitting instructions.

3.24 Cable Gland Fitting Instructions:

To enable correct assembly of the cable gland the

‘O’-ring (Fig. 8 item 1) must be placed over the cable

before the clamping insert (Fig. 8 item 2) can be

tightened.

Note: Cable diameter range:- 6.5 mm to 9.5 mm.

3.25 Supply Cord Extension:

The pumps are fitted with a supply cord to the following

specification:-

All models . . . . . . . . . . . . . . . . . HO5VV-F3 G 0.75 mm² - 6 Amp rated cable.

If the supply cord is to be extended, a cord of the same specification should be

used. Any connections or junction boxes used should be specifically suited for

the application and installed in accordance with the manufacturers instructions.

3.21 Wiring Diagram:

Model Fuse Size (AMPS)

All Models 13

3.22 Fuses: The following fuse size should be used with the appropriate pump:

Fig. 8

GREEN / YELLOW

BLUE

BROWN

230 VAC/1PH/50Hz

SUPPLY

RED

CAPACITOR

MOTOR

GREEN / YELLOW (LINK WIRE)

RED

YELLOW

RED

BLACK

FLOWSWITCH

REED (S3)

S2S2S1

PRESSURE

SWITCH (S1)

All models Fig. 7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Stuart-turner CHM160-30 FL User Manual Page 10

Comments to this Manuals

Related products and manuals for Pumps Stuart-turner CHM160-30 FL